Revit Structure Fundamentals – PDF Drive

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Read Exploring Autodesk Revit for Structure, 8th Edition by Prof Sham Tickoo with a free trial. Read millions of eBooks and audiobooks. View Autodesk Revit Structure Fundamentals – Metric Autodesk Authorized Publisher by Ascent – Center from ENGINEERIN MEC at Monash University. Available online downloads include before-and-after tutorial files and including annotation, detailing, and complex structures BIM software has become a.
 
 

Autodesk revit 2018 structure fundamentals pdf free download.Autodesk Revit 2018 Structure: Fundamentals

 
Getting the books autodesk revit structure fundamentals metric autodesk The following free teaching resources are available for faculty: PowerPoint. To take full advantage of Building Information Modeling, the Autodesk® Revit® Structure Fundamentals student guide.

Autodesk Revit Structure: Fundamentals | ASCENT –

Repeat for any additional split locations. Modify the elements that were split, as required. Page 35 of 46 Autodesk Revit Structure Fundamentals The Delete Inner Segment option is used when you select two split points along a linear element. When the option is selected, the segment between the two split points is automatically removed.

An additional option, Split with Gap , splits the linear element at the point you select as shown in Figure , but also creates a Joint Gap specified in the Options Bar. Note This command is typically used with structural precast slabs.

When selecting elements to trim, click the part of the element that you want to keep. The opposite part of the line is then trimmed. Select the first linear element on the side you want to keep.

Select the second linear element on the side you want to keep, as shown in Figure Select the cutting or boundary edge. Select the linear element to be trimmed or extended, as shown in Figure Select the linear elements that you want to trim or extend by selecting one at a time, or by using a crossing window, as shown in Figure For trimming, select the side you want to keep. You can click in an empty space to clear the selection and select another cutting edge or boundary.

Figure Offsetting Elements The Offset command is an easy way of creating parallel copies of linear elements at a specified distance, as shown in Figure Walls, beams, braces, and lines are among the elements that can be offset.

If you offset a wall that has a door or window embedded in it, the elements are copied with the offset wall. Page 37 of 46 Autodesk Revit Structure Fundamentals Figure The offset distance can be set by typing the distance Numerical method shown in Figure or by selecting points on the screen Graphical method. If this option is not selected, the Offset command moves the element the set offset distance.

In the Options Bar, select the Numerical option. In the Options Bar, type the required distance in the Offset field. Move the cursor over the element you want to offset. A dashed line previews the offset location. Move the cursor to flip the sides, as required. Click to create the offset. Repeat Steps 4 and 5 to offset other elements by the same distance, or to change the distance for another offset. With the Numerical option, you can select multiple connected linear elements for offsetting.

Hover the cursor over an element and press until the other related elements are highlighted. Select the element to offset all of the elements at the same time. Start the Offset command. In the Options Bar, select Graphical. Select the linear element to offset. Select two points that define the distance of the offset and which side to apply it.

You can type an override in the temporary dimension for the second point. Page 38 of 46 Autodesk Revit Structure Fundamentals Most linear elements connected at a corner automatically trim or extend to meet at the offset distance, as shown in Figure Note Estimated time for completion: 10 minutes In this practice you will use Split and Trim to clean up existing walls in a project.

You will then offset the entire foundation from the centerline, as shown in Figure , where it can support an architectural brick facade. Figure Task 1: Split and trim elements 1. Open the project Practice-Model-Modify-M. Select the horizontal foundation wall on Grid line A.

Page 39 of 46 Autodesk Revit Structure Fundamentals 3. Select the intersection of the reference plane and the foundation wall along Student Guide A as shown in Figure Select the horizontal wall as shown in Figure Remember to select the side of the wall that you want to keep.

Select the curved wall. The walls are trimmed as shown in Figure If the Reset analytical model warning opens, close it. Repeat the process on the other end. Hover the cursor over one of the foundation walls but do not select the wall.

The blue alignment line should display on the inside of the wall but outside of the student guide line. All of the foundation walls are selected as shown in Figure Once all of the walls are highlighted and the blue alignment line displays on the outside of the grid line, select a point.

The foundation is offset from the grid line as shown in Figure Press to finish the command. Save and close the model. What is the purpose of an alignment line? Displays when the new element you are placing or modeling is aligned with the grid system. Page 41 of 46 Autodesk Revit Structure Fundamentals b. Indicates that the new element you are placing or modeling is aligned with an existing object. Displays when the new element you are placing or modeling is aligned with a selected tracking point.

Indicates that the new element is aligned with true north rather than project north. When you are modeling not editing a linear element, how do you edit the temporary dimension, as that shown in Figure ? Select the temporary dimension and enter a new value. Type a new value and press. How do you select all structural column types, but no other elements in a view? In the Project Browser, select the Structural Column category.

Select all of the objects in the view and use d. Select one structural column, and click Filter to clear the other categories. Select Multiple in the ribbon. What are the two methods for starting Move or Copy? Start the command first and then select the objects, or select the objects and then start the command. Start the command from the Modify tab, or select the object and then select Move or Copy from the shortcut menu. Start the command from the Modify tab, or select the objects and select Auto-Move.

Where do you change the wall type for a selected wall, as shown in Figure ? Select the dynamic control next to the selected wall and select a new type in the drop-down list. In Properties, select a new type in the Type Selector drop-down list. Both Rotate and Array with Radial have a center of rotation that defaults to the center of the element or group of elements you have selected.

How do you move the center of rotation to another point as shown in Figure ? Select the center of rotation and drag it to a new location. In the Options Bar, click Place and select the new point. Which command would you use to remove part of a wall? Split Element b. Wall Joins c. Cut Geometry d. Demolish 8. Which of the following are ways in which you can create additional parallel walls, as shown in Figure ?

Select an existing wall, right-click and select Create Offset. Use the Offset tool in the Modify tab. Page 43 of 46 Autodesk Revit Structure Fundamentals c. Select an existing wall, hold and drag the wall to a new location. Use the Wall tool and set an offset in the Options Bar. Which command do you use if you want two walls that are not touching to come together, as shown in Figure ? Edit Wall Joins b. Join Geometry d. Link Revit models into the project so that you can design the structural project.

Add levels to define floor to floor heights and other vertical references. Copy and monitor elements from linked Revit models so that you know when changes have been made. Run Coordination Reviews to identify changes between the current project and any linked models.

In addition, many renovation projects start with existing 2D drawings. Instead of redrawing from scratch, link or import the CAD file as shown in Figure and trace over it in the Autodesk Revit software.

DWG and. DXF, Microstation. SAT, and Sketchup. SKP files. Figure Linking vs. Importing Linked files: Become part of the project, but are still connected to the original file. Use them if you expect the original file to change. The link is automatically updated when you open the project. Imported files: Become part of the project and are not connected to the original file. Use them if you know that the original file is not going to change. Open the view into which you want to link or import the file.

For a 2D file, this should be a 2D view. For a 3D file, open a 3D view. Select a file format in the Files of Type drop-down list to limit the files that are displayed. Set the other options as outlined below. This is especially useful if you are working with a 2D floor plan that you only need to have in one view. Colors Specify the color settings. Typical Autodesk Revit projects are mainly black and white. However, other software frequently uses color.

You can Invert the original colors, Preserve them, or change everything to Black and White. Layers are in. DWG files, while levels are in. DGN files. Import units Select the units of the original file, as required. Auto-Detect works in most cases. It is selected by default. The default position is Auto-Origin to Origin. If linking the file, Auto-By Shared Coordinates is also available.

Place at Select a level in which to place the imported file. If you selected Current view only, this option is grayed out. When a file is positioned Auto-Origin to Origin, it is pinned in place and cannot be moved. To move the file, click on the pin to unpin it, as shown in Figure Figure Setting an Imported or Linked File to Halftone To see the difference between new elements and the linked or imported file, you can set the file to Halftone, as shown in Figure Select the imported file.

Figure 4. DWG file as the base floor plan for a project, move elevation markers in the current project to match the footprint of the building, and modify the visibility graphics of the linked file so that it displays in halftone, as shown in Figure In the Application Menu, click New.

In the New Project dialog box, click Browse…. Click Open, and then click OK. If you do not have this version, the template has been provided in the practice files folder. The default structural template automatically opens in Level 2. Set or verify the options as follows: Select Current view only. Zoom to the extents of the view. Hint: Type ZE or double-click on the mouse wheel. Move the Building Elevation markers so that they are on the outside of the imported file as shown in Figure Select both parts of the elevation markers.

Page 7 of 34 Autodesk Revit Structure Fundamentals Click away from the linked file to release the selection. In the Quick Access Toolbar click view. No linked file displays because you linked it only into the Level 1 Return to the Structural Plans: Level 1 view. When the model is linked into the structural project, it only displays structural related elements by default, such as floors, columns, and walls. An example is shown in Figure Note A linked model automatically updates when the original file is changed.

Architectural, structural, and MEP models created in the Autodesk Revit software can be linked to each other as long as they are from the same release cycle. When you use linked models, clashes between disciplines can be detected and information can be passed between disciplines. Hint: Views and Disciplines When using a structural template, most of the views are set to display only structural elements. To display the architectural information or that of another discipline in Properties, change the Discipline of the view.

Before opening the file, set the Positioning, as shown in Figure Depending on how you decide to position the file, it is automatically placed in the project or you can manually place it with the cursor.

As the links are loading, do not click on the screen or click any buttons. The more links present in a project, the longer it takes to load.

Hint: Preventing Linked Model from being moved Once a linked model is in the correct location, you can lock it in place to ensure that it does not get moved by mistake, or prevent the linked model from being selected. To toggle off the ability to select links, in the Status Bar, click Select Links.

Select Pinned Elements. Select Links. Right-click on it and select the option as shown in Figure Page 9 of 34 Autodesk Revit Structure Fundamentals Figure Multiple Copies of Linked Models Copied instances of a linked model are typically used when creating a master project with the same building placed in multiple locations, such as a university campus with six identical student residence halls. Linked models can be moved, copied, rotated, arrayed, and mirrored.

There is only one linked model, and any copies are additional instances of the link. Copies are numbered automatically. You can change their names in Properties when the instance is selected. Figure Managing Links The Manage Links dialog box shown in Figure enables you to reload, unload, add, and remove links, and also provides access to set other options.

Note Reload is also available in the Project Browser. Expand the Revit Links node. Right-click on the Revit Link and select Reload or Reload From… Figure The options available in the Manage Links dialog box include the following: Reload From: Opens the Add Link dialog box, which enables you to select the file you want to reload.

Use this if the linked file location or name has changed. Unload: Unloads the file so that it the link is kept, but the file is not displayed or calculated in the project.

Use Reload to restore it. Remove: Deletes the link from the file. Links can be nested into one another. How a link responds when the host project is linked into another project depends on the option in the Reference Type column: Overlay: The nested linked model is not referenced in the new host project.

Attach: The nested linked model displays in the new host project. The option in the Path Type column controls how the location of the link is remembered: Relative Searches the root folder of the current project. If the file is moved, the software still searches for it. Absolute Searches only the folder where the file was originally saved.

If the original file is moved, the software is not able to find it. Other options control how the linked file interfaces with Worksets and Shared Positioning. This can help you clean up the view, or assign a view to build on. Figure The Display Settings include: By host view: The display of the Revit link is based on the view properties of the current view in the host model. By linked view: The appearance of the Revit link is based on the view properties of the selected linked view and ignores the view properties of the current view.

Custom: You can override all of the graphical elements. Link an architectural model into a structural project. Page 11 of 34 Autodesk Revit Structure Fundamentals Note Estimated time for completion: 5 minutes In this practice you will link an architectural model created in Autodesk Revit into a new structural project and pin the linked model into place. You will then change view properties to a coordination view that shows both the structural and architectural features, as shown in Figure Figure Task 1: Link an architectural model into a structural project 1.

Start a new project based on the Structural Analysis-DefaultMetric. The file automatically opens in the Structural Plans: Level 2 view.

Select the linked model in the view only gridlines display. Page 12 of 34 Autodesk Revit Structure Fundamentals 5. This will ensure that the linked model will not be accidentally 6.

Adjust the Building Elevation markers so that they are around the link, as shown in Figure Note Only the grids are currently displayed because the view is set to display structural elements only.

Zoom to fit the view Hint: Type ZF. Ensure that you do not have anything selected so that the Structural Plan Properties of the new view are displayed. In Properties, change the Discipline to Coordination, as shown in Figure Click Apply. The architectural walls now display. Save the project in your practice files folder as Syracuse Suites-. The default structural template includes two levels, but you can define as many levels in a project as required.

They can go down for basements as well as up. Note Floor levels are frequently set by the architect and need to be copied and monitored into the structural model.

You can also draw levels directly in a project, as required. You must be in an elevation or section view to define levels. Once you constrain an element to a level it moves with the level when the level is changed.

Figure How To: Create Levels 1. Open an elevation or section view 2. In the Type Selector, set the Level Head type if required.

You can also click Plan View Types… to select the types of views to create when you place the level. Pick Lines to select an element using an offset. Be careful when you use Pick Lines that you do not place levels on top of each other or other elements by mistake. Continue adding levels as required. Level names are automatically incremented as you place them so it is helpful to name them in simply i.

This also makes it easier to find the view in the Project Browser. A fast way to create multiple levels is to use the Pick Lines option using an offset. In the Options Bar, specify an Page 14 of 34 Autodesk Revit Structure Fundamentals Offset, select an existing level, and then pick above or below to place the new level, as shown in Figure Note You specify above or below the offset by hovering the mouse on the required side.

Figure When using the Figure Line option, alignments and temporary dimensions help you place the line correctly, as shown in Note You can sketch the level lines from left to right or right to left depending on where you want the bubble. However, ensure that they are all sketched in the same direction.

Figure You can also use Copy to duplicate level lines. The level names are incremented but a plan view is not created. Modifying Levels You can change levels using standard controls and temporary dimensions, as shown in Figure You can also make changes in the Properties palette. Modify the level by dragging its model end at each end of the line enables you to drag the level head to a new location. Create or remove a length or alignment constraint controls whether the level is locked in alignment with the other levels.

If it is locked and the level line is stretched, all of the other level lines stretch as well. If it is unlocked, the level line stretches independent of the other levels. Click Add Elbow to add a jog to the level line as shown in Figure Drag the shape handles to new locations as required. This is a view-specific change. Page 15 of 34 Autodesk Revit Structure Fundamentals Figure Figure To change the level name or elevation, double-click on the information next to the level head, or select the level and modify the Name or Elevation fields in Properties, as shown in Figure Figure When you rename a Level, an alert box opens, prompting you to rename the corresponding views as shown in Figure Hint: Copying Levels and Grids from other projects Levels and grid lines can be added by drawing over existing levels or grids in an imported or linked CAD file.

Some projects might require both methods. Creating Plan Views By default, when you place a level, plan views for that level are automatically created. If Make Plan View was toggled off when adding the level, or if the level was copied, you can create plan views to match the levels.

Note Typically, you do not need to create plan views for levels that specify data, such as the top of a foundation wall or the truss bearing height. Level heads with views are blue and level heads without views are black, as shown in Figure The 3D industry is no stranger to small companies being swallowed up by giant monolithic corporations.

We’ve seen it time and again. Maybe the most prolific example is Autodesk — this multinational software company has made a huge number of acquisiti. Landscape architects often begin by 3D modeling landscape essentials such as topography, hardscape, and vegetation when adopting BIM, regardless of their 3D-modeling program of choice.

Yet BIM also opens the opportunity to build on form-based 3D mode. The advantages of BIM adoption are rarely a. Once upon a time, all architectural renderings were done by hand — in pencil, pastel or ink, if not acrylic or watercolour. Mike Griggs is a 3D and visual effects artist with vast experience across the industry, as both a creator and a technical writer.

Each ju. In a new tool landed on the desks of engineers that would revolutionize the construction and design industries. That tool, eventually known as AutoCAD, ushered computer-aided design into the field with the goal of increased accuracy and efficien. Heavy equipment hydraulic hose retailer, fitting and service company Hydraulink has opened a new franchise in Bunbury.

Hydraulink WA state manager Andrew Lever says new head of the facility, Mitch Avins, will be a familiar face to many in the industr. This Italian-designed audio collection brings clear and balanced sound outdoors. Inside this sculptural device, a high-performance loudspeaker projects sound in all directions using a uniquely designed conical base.

Several audio-boosting material op. The polycarbonate mesh is now being specified and installed around the world. Searching for well-designed kitchens with a point of difference? Well, look no further. The JAG Kitchens showroom in the heart of Adelaide mixes a wealth of experience, design training and impeccable taste to visualise your renovation and accommodate.

Jury citation This school, based on the Reggio Emilia learning system, is experimental by nature. The plan, based around the retention of trees, represents the nature of its experimentation but also delivers an outcome that is generous to the broader.

Difficult terrain on a steep site was no challenge for the Senator Pools team that constructed this spectacular pool. Due to the nature of. Based in Dunsborough, Western Australia,. Mike is a freelance technology journalist who is fascinated with gaming, futuristic technology and motorsport. Figure To make a linear array in two directions, you need to array one direction first, select the arrayed elements, and then array them again in the other direction.

Groups can be selected by selecting any elements in the group. Number Specifies how many instances you want in the array. Move To: 2nd specifies the distance or angle between the center points of the two elements. Last specifies the overall distance or angle of the entire array. Constrain Restricts the direction of the array to only vertical or horizontal Linear only. Angle Specifies the angle Radial only. Center of rotation Specifies a location for the origin about which the elements rotate Radial only.

How To: Create a Radial Array 1. Drag Center of Rotation or use Place to the move the center of rotation to the appropriate location, as shown in Figure Remember to set the Center of Rotation control first, because it is easy to forget to move it before specifying the angle. Modifying Array Groups When you select an element in an array that has been grouped, you can change the number of instances in the array, as shown in Figure For radial arrays you can also modify the distance to the center.

If you select an individual element in an array and click Ungroup , the element you selected is removed from the array, while the rest of the elements remain in the array group.

You can use ‘ Filter to ensure that you are selecting only Model Groups. In this practice you will use Move and Copy to create a column grid with columns using existing elements in a project. You will then rotate one of the grid lines and the columns along that grid line and mirror the new grid lines to create the opposite part of the building.

Finally you will array a set of columns around an arc, and create a grid line of the array as shown in Figure Figure Task 1 – Move and copy elements. Open the project Practice-Model-Editing-M. Select Grid A and the structural column that is at the intersection. Hint: hold to select more than one element. In the Options Bar, select Multiple, as shown in Figure Pick a point anywhere along the grid line for the start point.

Move the cursor down below the grid line and type mm. Create two more copies which are mm apart for a total of four horizontal grid lines. Click Modify to exit the command. Select Grid 1 and the four columns along Grid 1. Copy the elements to the right at a distance of mm until you have a total of four vertical grid lines with the associated columns.

Renumber the grid lines as shown in Figure Zoom in on column A1. Select the column but not the grid line. Save the project.

Select Grid 1. In the Options Bar, click Place and select the midpoint of column D1 as the center of rotation. To start rotating, select the intersection of grid lines A1. To finish rotating, select the midpoint of the column you moved earlier as shown in Figure Figure 6. For the start angle, select a point to the right along Grid A as shown in Figure Figure 9. For the second angle, select a point along Grid 1, as shown on the left in Figure The column is now rotated perpendicular to the angle of Grid 1 as shown on the right in Figure Repeat the process for the rest of the columns along Grid 1.

Task 3 – Mirror elements. Delete Grid 4 and its columns. You are going to mirror Grid 1 and its columns to this place. Ref Plane. Draw a vertical line between Grid 2 and Grid 3 and use temporary dimensions to set the distances from each grid to mm as shown in Figure , and click Modify to end. Select Grid 1 and all of the columns in the grid. To select multiple elements, draw a window around the group or hold as you select.

Select the vertical reference plane that you created earlier as shown in Figure Renumber the new grid line to 4. Select column A3. Click Copy and copy column A3 to the right by mm. The new column is selected. A Warning box opens. This issue is corrected in later steps. Relocate the center of the array by dragging ‘ to the intersection of the vertical ref plane and Grid 1 as shown in Figure The new columns display along the arc with the number still selected as shown in Figure Change the number to 6.

Move the elevation marker out of the way. In the Draw panel, click Grid. Move the cursor over the area of the array as shown in Figure When an arc displays, select it. Click Modify. Most Autodesk Revit elements can be aligned. For example, you can line up the tops of windows with the top of a door, or line up furniture with a wall. Select a line or point on the element that is going to remain stationary. For walls, press to select the correct wall face. Select a line or point on the element to be aligned.

The second element moves into alignment with the first one. Once you have created the alignment, a padlock is displayed. Click on the padlock to lock it, as shown in Figure Locking elements enlarges the size of the project file, so use this option carefully. You can also hold to make multiple alignments. For walls, you can specify if you want the command to prefer Wall centerlines, Wall faces. Center of core, or Faces of core, as shown in Figure The core refers to the structural members of a wall as opposed to facing materials, such as sheet rock.

You can use alignment lines, snaps, and temporary dimensions to help place the split point. After you have split the linear element, you can use other editing commands to modify the two parts, or change the type of one part, as shown with walls in Figure You can split walls in plan, elevation or 3D views.

Enhanced in The Split Element command works with structural columns and framing elements. The command respects connections, justifications, and other settings. Move the cursor to the point you want to split and select the point.

Repeat for any additional split locations. Modify the elements that were split, as required. When the option is selected, the segment between the two split points is automatically removed.

This command is typically used with structural precast slabs. The opposite part of the line is then trimmed. Select the first linear element on the side you want to keep. Select the second linear element on the side you want to keep, as shown in Figure Select the cutting or boundary edge. Select the linear element to be trimmed or extended, as shown in Figure Select the linear elements that you want to trim or extend by selecting one at a time, or by using a crossing window, as shown in Figure For trimming, select the side you want to keep.

Offsetting Elements The Offset command is an easy way of creating parallel copies of linear elements at a specified distance, as shown in Figure Walls, beams, braces, and lines are among the elements that can be offset. The offset distance can be set by typing the distance Numerical method shown in Figure or by selecting points on the screen Graphical method. If this option is not selected, the Offset command moves the element the set offset distance. In the Options Bar, select the Numerical option.

In the Options Bar, type the required distance in the Offset field. Move the cursor over the element you want to offset. A dashed line previews the offset location. Move the cursor to flip the sides, as required. Click to create the offset. Repeat Steps 4 and 5 to offset other elements by the same distance, or to change the distance for another offset.

With the Numerical option, you can select multiple connected linear elements for offsetting. Hover the cursor over an element and press until the other related elements are highlighted. Select the element to offset all of the elements at the same time.

How To: Offset using the Graphical Method 1. Start the Offset command. In the Options Bar, select Graphical.

Select the linear element to offset. Select two points that define the distance of the offset and which side to apply it. You can type an override in the temporary dimension for the second point. Most linear elements connected at a corner automatically trim or extend to meet at the offset distance, as shown in Figure In this practice you will use Split and Trim to clean up existing walls in a project.

You will then offset the entire foundation from the centerline, as shown in Figure , where it can support an architectural brick facade. Open the project Practice-Model-Modify-M. Select the horizontal foundation wall on Grid line A. Select the intersection of the reference plane and the foundation wall along Student Guide A as shown in Figure Select the horizontal wall as shown in Figure Remember to select the side of the wall that you want to keep.

Select the curved wall. The walls are trimmed as shown in Figure If the Reset analytical model warning opens, close it. Repeat the process on the other end. Z-raphicsl o Numericsl C rser: ,0 Ccpy Figure 3. Hover the cursor over one of the foundation walls but do not select the wall.

The blue alignment line should display on the inside of the wall but outside of the student guide line. All of the foundation walls are selected as shown in Figure Once all of the walls are highlighted and the blue alignment line displays on the outside of the grid line, select a point.

The foundation is offset from the grid line as shown in Figure Save and close the model. What is the purpose of an alignment line? Displays when the new element you are placing or modeling is aligned with the grid system.

Indicates that the new element you are placing or modeling is aligned with an existing object. Displays when the new element you are placing or modeling is aligned with a selected tracking point.

Indicates that the new element is aligned with true north rather than project north. When you are modeling not editing a linear element, how do you edit the temporary dimension, as that shown in Figure ? Select the temporary dimension and enter a new value. How do you select all structural column types, but no other elements in a view?

In the Project Browser, select the Structural Column category. Select all of the objects in the view and use clear the other categories. Select one structural column, and click Multiple in the ribbon.

Start the command first and then select the objects, or select the objects and then start the command. Start the command from the Modify tab, or select the object and then select Move or Copy from the shortcut menu. Start the command from the Modify tab, or select the objects and select Auto-Move.

Where do you change the wall type for a selected wall, as shown in Figure ? Figure a. Select the dynamic control next to the selected wall and select a new type in the drop-down list. In Properties, select a new type in the Type Selector drop-down list. How do you move the center of rotation to another point as shown in Figure ?

Select the center of rotation and drag it to a new location. In the Options Bar, click Place and select the new point. Center and d. Which command would you use to remove part of a wall? Cut Geometry d. Which of the following are ways in which you can create additional parallel walls, as shown in Figure ? Select an existing wall, right-click and select Create Offset. Use the Offset tool in the Modify tab.

Select an existing wall, hold and drag the wall to a new location. Use the Wall tool and set an offset in the Options Bar 9. Which command do you use if you want two walls that are not touching to come together, as shown in Figure ?

After Before Figure a. Join Geometry d. In addition, many renovation projects start with existing 2D drawings. Instead of redrawing from scratch, link or import the CAD file as shown in Figure and trace over it in the Autodesk Revit software. S vracuse-S uites-First-Flccr. DWG and. DXF, Microstation. SAT, and Sketchup.

SKP files. Linking vs. Use them if you expect the original file to change. The link is automatically updated when you open the project. Use them if you know that the original file is not going to change.

Open the view into which you want to link or import the file. For a 3D file, open a 3D view. Set the other options as outlined below. This is especially useful if you are working with a 2D floor plan that you only need to have in one view.

Colors Specify the color settings. Typical Autodesk Revit projects are mainly black and white. However, other software frequently uses color. You can Invert the original colors, Preserve them, or change everything to Black and White. DWG files, while levels are in.

DGN files. Import units Select the units of the original file, as required. Auto-Detect works in most cases. Correct Lines If lines in a CAD file are off axis by less than 0.

It is selected by default. The default position is Auto-Origin to Origin. If linking the file, Auto-By Shared Coordinates is also available. Place at Select a level in which to place the imported file. If you selected Current view only, this option is grayed out. When a file is positioned Auto-Origin to Origin, it is pinned in place and cannot be moved.

To move the file, click on the pin to unpin it, as shown in Figure Setting an Imported or Linked File to Halftone To see the difference between new elements and the linked or imported file, you can set the file to Halftone, as shown in Figure How To: Set an Element Halftone 1.

Select the imported file. In this practice you will link an AutoCAD. DWG file as the base floor plan for a project, move elevation markers in the current project to match the footprint of the building, and modify the visibility graphics of the linked file so that it displays in halftone, as shown in Figure In the Application Menu, click D New.

In the New Project dialog box, click Browse Click Open, and then click OK. If you do not have this version, the template has been provided in the practice files folder. The default structural template automatically opens in Level 2. Zoom to the extents of the view. Hint: Type ZE or double-click on the mouse wheel. Move the Building Elevation markers so that they are on the outside of the imported file as shown in Figure Select both parts of the elevation markers. Click away from the linked file to release the selection.

No linked file displays because you linked it only into the Level 1 view. Return to the Structural Plans: Level 1 view. When the model is linked into the structural project, it only displays structural related elements by default, such as floors, columns, and walls. An example is shown in Figure A linked model automatically updates when the original file is changed. Hint: Views and Disciplines When using a structural template, most of the views are set to display only structural elements.

To display the architectural information or that of another discipline in Properties, change the Discipline of the view. Before opening the file, set the Positioning, as shown in Figure The more links present in a project, the longer it takes to load. To toggle off the ability to select links, in the Status Bar, click Select Links.

Right-click on it and select the option as shown in Figure There is only one linked model, and any copies are additional instances of the link. You can change their names in Properties when the instance is selected. Expand the Revit Links node. Use this if the linked file location or name has changed. Use Reload to restore it. Other options control how the linked file interfaces with Worksets and Shared Positioning. This can help you clean up the view, or assign a view to build on.

By linked view: The appearance of the Revit link is based on the view properties of the selected linked view and ignores the view properties of the current view.

Custom: You can override all of the graphical elements. In this practice you will link an architectural model created in Autodesk Revit into a new structural project and pin the linked model into place. You will then change view properties to a coordination view that shows both the structural and architectural features, as shown in Figure Start a new project based on the Structural Analysis-DefaultMetric. The file automatically opens in the Structural Plans: Level 2 view.

Select the linked model in the view only gridlines display. This will ensure that the linked model will not be accidentally moved in the view. Adjust the Building Elevation markers so that they are around the link, as shown in Figure Only the grids are currently displayed because the view is set to display structural elements only.

Zoom to fit the view Hint: Type ZF. Ensure that you do not have anything selected so that the Structural Plan Properties of the new view are displayed. In Properties, change the Discipline to Coordination, as shown in Figure Sun Path Figure Click Apply. The architectural walls now display. Save the project in your practice files folder as Syracuse Suites-. The default structural template includes two levels, but you can define as many levels in a project as required. They can go down for basements as well as up.

The best-selling Revit guide, now more complete than ever with all-new coverage on the release Mastering Autodesk Revit for Architecture is packed with focused discussions, detailed exercises, and real-world examples to help you get up to speed quickly on the latest version of Autodesk Revit for Architecture.

Organized according to how you learn and implement the software, this book provides expert guidance for all skill levels. Hands-on tutorials allow you to dive right in and start accomplishing vital tasks, while compelling examples illustrate how Revit for Architecture is used in every project. Available online downloads include before-and-after tutorial files and additional advanced content to help you quickly master this powerful software.